Cope-LLG Catalogue 2018

1021 8. Liquid Handling Pumps/Dosing pumps-Gear pumps GENERAL CATALOGUE EDITION 20 E & OE. Double diaphragm pumps, oil-free Oil-free, air-operated, double diaphragm pumps are an ideal solution for handling viscous, corrosive, abrasive and flammable liquids. The pumps are available in Polypropylene (PP), PVDF and PA. The diaphragms, balls and valve seats are available in TPV (NBR-PP) and PTFE . Solids up to 1.6 mm diameter can be pumped. 1 Specifications Flow rate: 16 L/min Suction lift dry: 6 m Operating pressure: min. 1.4 bar/max. 6.8 bar Temperature max: 66 °C Suction/ Discharge: ¼" BSP female 1 Description Material Membrane PK Cat. No. For liquids based on water, lubricant, mineral oil For corrosive liquids, inorganic alkalis and acids For concentrated alkalis and acids with higher temperature For solvents, paints, fuel PP PP PVDF PA TPV PTFE PTFE PTFE 1 1 1 1 9.880 350 9.880 351 9.880 352 9.880 353 Gear pump drives, MCP-Z-Standard, MCP-Z-Process Flow rate 1 to 7241 ml/min (depending on pump-head). 2 drive units can be combined with 20 interchangeable magnetically-coupled pumpheads. Flow rates of 1 to 7241ml/min. are attainable with pulse-free flow. Up to 5.6 bar differential pressure and 21 bar system pressure. MCP-Z-Standard Microprocessor controlled. Digital display of rotation speed, flow rate, dispensing volume or dispensing time. 4 programme memory and 6 programmable pumping or dispensing functions with calibration mode. Flow rates stored for 20 pumpheads. With RS232 and analogue interfaces. MCP-Z-Process Industrial process-adapted drive, dust and watertight, washdown (IP 65) capability through completely sealed stainless steel housing. PC programmed processes can be stored in the pump memory and operated without PC. Other specifications are as MCP-Z-Standard. Specifications:MCP-Z Standard - speed: 60-6000 min -1 - speed setting: 1-99.9 %, resolution 0.1 % - power supply: 230 V/50 Hz - 115 V/60 Hz - weight: 6.4 kg (without pump head) - protection rating: IP 30 Specifications: MCP-Z Process - speed: 60-6000 min -1 - speed setting: min -1 . resolution: 0.1 min -1 - power supply: 100-230 V/50-60 Hz - weight: 6.9 kg (without pump head) - protection rating: IP 65 2 3 Cole-Parmer GmbH Type PK Cat. No. MCP-Z-Standard MCP-Z-Process Spare magnet for MCP-Z-Standard Spare magnet for MCP-Z-Process 1 1 1 1 9.828 308 9.828 309 9.828 344 9.828 345 Please order two tubing connectors separately. Tubing connectors - see Gear pump heads. 2 9.828 308 3 9.828 309 Lutz Pumpen