Cope-LLG Catalogue 2018

1263 12. Environmental-, soil-, water-, food analysis Water purification/Pure and ultra-pure water GENERAL CATALOGUE EDITION 20 E & OE. Mixed-bed ion exchanger made of stainless steel Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems. - pressure resistant to 10 bar /8 bar at E40dA - optimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unit - flow rates up to 700 litres/hour - the unique behropur ® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and quality - can be connected to the raw water network directly and without a pressure reducer - resistant to alternating pressure - hard rubber collars vulcanized to the base and top of the unit offer effective protection - convenient transport thanks to the handles embedded into the top part of the unit - conductivity is controlled directly on the unit (installed measuring equipment) or with remote location meter - Also available with shut-off when the limit value is reached and limit control 1 behr Specifications E 28/E 40 d Exchange capacity*at 10°dH 2800 litres/4000 litres Flow max. litres/hour 500/700 Diameter in cm 24/24 Height incl. LF in cm 74/84 Height of cartridge only in cm 60/70 Type Material Description PK Cat. No. E28d E40d E28dZ E40dZ E28dA E40dA Stainless steel V 4A Stainless steel V 4A Stainless steel V 4A Stainless steel V 4A Stainless steel V 4A Nylon complete with conductivity meter complete with conductivity meter spare cartridge spare cartridge conductivity meter with limit switch and electrovalve conductivity meter with limit switch and electrovalve 1 1 1 1 1 1 9.915 730 9.915 731 9.915 732 9.915 733 9.915 734 9.915 735 * Limit value 20 µS/cm 1 Filter for behropur ® mixed-bed ion exchanger Filter for pressure-resistant behropur ® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance. Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur ® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage. FG 130 behropur ® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50 °C FE 130 behropur ® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80 °C AF 130 behropur ® filter insert, carbon, 20, length 5", max. pressure 6bar, max. temp. 50 °C 2 behr Type PK Cat. No. FG 130 FE 130 AF 130 1 1 1 9.915 736 9.915 737 9.915 738 2