Cope-LLG Catalogue 2018

1273 12. Environmental-, soil-, water-, food analysis Water purification/Pure and ultra-pure water GENERAL CATALOGUE EDITION 20 E & OE. Accessories for pure and ultrapure purification systems Barnstead ™ Smart2Pure ™ Thermo Scientific Description PK Cat. No. Wall mounting bracket Ultrapure water cartridge UV replacement lamp Sterile filter, 0.2µm for direct removal/device Reservoir vent filter Cleaning Solution Reverse Osmosis membrane with integrated pretreatment, 3 L/hr Reverse Osmosis membrane with integrated pretreatment, 6 L/hr Reverse Osmosis membrane with integrated pretreatment, 12 L/hr CO 2 adsorber and sterile venting filter for Smart2Pure 12 UV immersion lamp for tank for Smart2Pure 12 Smart2Pure 12 Tank 30 l Smart2Pure 12 Tank 60 l Wall mounting bracket for Smart2Pure 12 30L reservoir Wall mounting bracket for Smart2Pure 12 60L reservoir 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.535 976 9.535 966 9.535 960 9.535 961 9.535 986 6.243 960 9.535 970 9.535 972 9.535 973 9.535 923 9.535 925 9.535 931 9.535 935 9.535 926 9.535 927 LaboStar ™ RO/DI The LaboStar ™ RO/DI series produce high quality water with very low energy consumption. The use of "low energy" membranes enable a very efficient and economical operation. All LaboStar ™ RO and RO/DI systems are equipped with a built-in 7 l storage tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar ™ RO produces Type III water. LaboStar ™ RO/DI is equipped with an additional final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. Both units offers two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. The 7 l storage tank capacity can be increased by an additional 30 or 60l tank. Pure water is collected in the tank and is recirculated by an integrated pump. The LaboStar ™ RO produces Type III water with a salt retention rate of up to 98%. LaboStar ™ RO produces Type III water. LaboStar ™ RO/DI is equipped with an additional final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. Both units offer two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. LaboStar ™ RO/DI systems are delivered with the first set of all modules and filters required for immediate operation. - Pure water circulation right into the dispenser head - Easy to dispense water using the practical dispenser - 0.2 µm sterile filter with or without endotoxinretention as availableoption - Whisper operation mode - Rapid and simple disinfection - Conductivity monitoring of RO and DI water - Easy module exchange via quick-release connections - Small and compact 1 evoqua Specifications Permeate production rate at 15 °C: 10 l/h Permeat conductivity: depending on tap water (RO Version) / <0.1 (DI Version) Bacteria: 1 KbE/ml (with a 0.2 µm sterile filter) Particle >0.1 up to 1µm: < 1 per ml Feed water conductivity: < 2000 µS/cm Silt densitiy index SDI: < 3 Dimensions (W x D x H): 290 x 400 x 535 mm Power supply: 100-240 V, 50/60 Hz Type Pure water output at 15 °C Weight PK Cat. No. L / hr. kg LaboStar ™ RO LaboStar ™ RO DI 10 10 10 22 23 1 1 6.267 635 6.267 636 1