Cope-LLG Catalogue 2018

1333 13. Life Sciences Cell Culture/Aspirators GENERAL CATALOGUE EDITION 20 E & OE. Aspirator LLG-uni VACUUSYS LLG-uni VACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations. - Integrated vacuum pump with vacuum control - Easy to use - Self-closing connectors for quick installation and prevention of liquid or aerosol escape - Liquid level sensor , prevents liquid overflow - Autoclavable waste collection bottle and nozzle Scope of delivery: Vacuum Aspiration System with integrated vacuum pump, 4 liter waste collection bottle, single channel needle and 8-channel needle aspirator handle, tubing and quick-connectors 1 Specifications Vacuum range: 0 to 600 mbar (adjustable) Aspiration rate: 1 to 15 ml/s Noise emission: < 50 dB(A) Dimensions (W x D x H): 180 x 320 x 530 mm Weight: 3.4 kg Power supply: 100-240 V, 50/60 Hz Warranty: 3 years Type PK Cat. No. LLG-uni VACUUSYS with EU-plug LLG-uni VACUUSYS with UK-plug Single channel needle 8-channel needle Wide mouth bottle, PP, 4 l Bottle cap Handle, incl. single pin 1 1 1 1 1 1 1 6.263 585 6.263 586 6.263 587 6.263 588 7.048 064 6.263 584 6.263 583 1 Aspirator with trap flask FTA-1 Designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques. - All in one system with integrated pump and aspiration tip - Pump is for 1.5 ml reaction tubes and very small volumes with an average suction power of 600 mL/min - Trap flasks volume 1 L - Fitted with hydrophobic microbiological filter - Vacuum pressure of - 500 mbar - The hydrophobic microbiological suction filter eliminates risk of contamination from the trap flask. Efficiency up to 99.9 %, holds particles bigger than 0.027 micron, which are smaller than agents of Hepatitis A, B and C. - Polyethylene tube connects collecting tip to the trapping flask - Built-in micro-compressor creates negative pressure in trapping flask for removal of liquid from microtubes - 1 L trap flask for collection of alcohol/buffer from microtest tube walls during reprecipitation techniques - Tube holder to accommodate two tubes for collecting tip washing and storing, enabling re-use of the tip. 2 Grant Type Description PK Cat. No. FTA-1 FTA-B FTA-T MA-8 MA-8T All in one system Spare aspiration trap bottle Spare tubing set 8 channel adapter set 8 channel tip 1 1 1 1 1 9.721 058 9.721 075 9.721 076 9.721 077 9.721 078 2 In-Line Filters - please see page 718.