Cope-LLG Catalogue 2018

143 1. General laboratory consumables Tubing/Plastic-Adapters, Clips, Clamps GENERAL CATALOGUE EDITION 20 E & OE. LLG-Hose cutter A perfect tool to cut even thick hoses with external diameter from 6.0 mm to 25 mm. The cut edges of tubings with the tube cutter are always clean and flat. Offers a clean and sharp cut of tubings in few seconds. Hose cutter has a two end blade which can be turned when one gets blunt and the other sharp side used. 1 Description PK Cat. No. for diam. 6 - 25mm 1 6.267 395 1 Messfix tubing gauge Small, red, handy polypropylene gauge. For rapid measurement of internal and external diameters of tubing , test tubes etc. within the range 1.5 mm to 16 mm. 2 schuett-biotec Width Depth Height PK Cat. No. mm mm mm 50 120 12 1 9.205 800 2 Laboratory threaded joints - GL 14/18/25 Enables GL threads to clamp easily to fluoroplastic or thick-walled tubing made out of other plastics, glass or metal. (Ideally suited for connection with Bola GL fittings, Bola pressure valves, Bola GL taps and Bola GL ball valves). The laboratory threaded joints consist of a red screw cap made of glass-fibre reinforced ETFE, a sealing disc and a tapered sealing ring made of PTFE, as well as a V-ring made of glass-fibre reinforced ETFE. This patented system withstands pressures up to approx. 10 bar, is suitable for a vacuum (at room temperature in the case of sizes 14 to GL25) and is easy to assemble without tools. The substance that passes through only comes in contact with PTFE. Bola laboratory threaded joints can, for example, be used to hold probes (including stainless steel probes), sensors, laboratory taps, submerged tubes, thermometers or as a cable feed. 3 BOLA For external tube diam. Neck thread PK Cat. No. mm GL 1.6 3.0 3.2 4.0 6.0 6.35 3.2 6.0 8.0 10.0 6.0 8.0 10.0 12.0 14 14 14 14 14 14 18 18 18 18 25 25 25 25 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.209 803 9.209 806 9.209 807 9.209 808 9.209 809 9.209 810 9.209 817 9.209 819 9.209 820 9.209 821 9.209 839 9.209 840 9.209 841 9.209 842 3 GL fittings, PTFE PTFE couplings with GL connector screwthread. Connect PTFE, PFA, FEP, glass and metal tubing. Fittings are chemical and temperature resistant to approx. 250 °C. Can be used at working pressures of up to 10 bar when used in combination with Bola laboratory screwthread connections (at room temperature). A further advantage is that they can be used as expansion/reduction adapters to connect tubing of different diameters. For easy tubing connection we recommend accessory Bola Laboratory screwthread connectors which can be ordered separately. 4 BOLA Bore Neck thread PK Cat. No. mm GL 6.5 10.5 14.5 14 18 25 1 1 1 9.207 113 9.207 114 9.207 115 4