Cope-LLG Catalogue 2018

1458 14. Chromatography Liquid chromatography/Solvent storage/handling GENERAL CATALOGUE EDITION 20 E & OE. SafetyCaps for HPLC solvent supply The integrated air valve (A) blocks hazardous vapours (B) and cleans the inflowing air (C) from dust and dirt particles. Various connectors keep your capillaries and tubes safely tightened (D) - even when extracting solvents from the reservoir. SafetyCaps are available for most common glass bottles (e.g. thread size GL45). They can be customised for other container sizes by using different adapters. Especially recommended for HPLC use: Solvents stay clean and components of solvent mixtures can not evaporate. Optimum protection against health hazards caused by evaporation and insufficient sealing. Key advantages: - No evaporation of hazardous gases, no contamination of solvents - No crimping of connection tubing, easy container exchange - No air intake (HPLC) - Save expensive solvents by avoiding evaporation, cost efficiency - Reproducible analysis results through stable mobile phase - Chemically resistant PTFE body (E) - Freely rotatable screw cap (F) available for different thread sizes 1 2 1 2 SafetyCaps, S 40/GL 40/GL 45 Safe solvent supply. With integral air filter vent. For maximum efficiency, we recommend that the vent is changed every 6 months. The filter membrane absorbs dust and dirt particles to protect your solvent reservoirs. The vent is universally suitable for all SafetyCaps. It also works with your current SafetyCaps, simply replace the old vent with the new one. 3 S.C.A.T. 3 Description Thread Connections PK Cat. No. SafetyCap I SafetyCap II SafetyCap I (1with stopcock) SafetyCaps I SafetyCaps II SafetyCaps III SafetyCaps IV SafetyCaps VI SafetyCaps I, with 1 stopcock SafetyCaps II, with 2 stopcocks SafetyCaps III, with 3 stopcocks SafetyCaps IV, with 4 stopcocks SafetyCaps VI, with 6 stopcocks SafetyCaps II, combined (1with stopcock / 1 without stopcock) SafetyCaps III, combined (2 with stopcocks / 1 without stopcock) SafetyCaps I, for preparative operation SafetyCaps II, for ground neck bottles S40 / GL40 S40 / GL40 S40 / GL40 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 NS 29/32 1 capillaries (3.2 mm o.d.) 2 capillary (3.2 mm o.d.) 1 capillaries (3.2 mm o.d.) 1 capillary (3.2 mm o.d.) 2 capillaries (3.2 mm o.d.) 3 capillaries (3.2 mm o.d.) 4 capillaries (3.2 mm o.d.) 6 capillaries (3.2 mm o.d.) 1 capillary (3.2 mm o.d.) 2 capillaries (3.2 mm o.d.) 3 capillaries (3.2 mm o.d.) 4 capillaries (3.2 mm o.d.) 6 capillaries (3.2 mm o.d.) 2 capillaries (3.2 mm o.d.) 3 capillaries (3.2 mm o.d.) 1 capillary (4.76 mm o.d.) 2 capillaries (3.2 mm o.d.) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6.253 976 7.628 821 9.139 895 9.139 850 9.139 851 9.139 852 9.139 853 9.139 854 9.139 855 9.139 856 9.139 857 9.139 858 9.139 859 9.139 860 9.139 861 9.139 862 9.139 863 HPLC starter kits, GL 45 - Complete set for one HPLC system with up to 4 solvent reservoirs - Price advantage compared to ordering piece by piece - Suitable for all current HPLC systems - Use the supplied blind plugs to tighten connectors which are temporarily inactive or not in use Contents of the different sets: HPLC SafetySet 1: 3 x SafetyCap I, 1 x SafetyCap II, 1 x blind plug HPLC SafetySet 2: 4 x SafetyCap II, 4 x blind plug HPLC SafetySet 3: 3 x SafetyCap I fire resistant, 1 x SafetyCap II fire resistant, 1 x blind plug 4 5 6 S.C.A.T. Type PK Cat. No. HPLC SafetySet 1 HPLC SafetySet 2 HPLC SafetySet 3 1 1 1 7.627 142 7.670 287 6.264 451 4 5 6