Cope-LLG Catalogue 2018

420 3. Analytical measurement and testing Material testing/Thickness measurement-Hardness measurement GENERAL CATALOGUE EDITION 20 E & OE. Coating thickness gauge, digital, TC/TE/TG For all coatings on magnetic and non-magnetic metals. - Ergonomic design for easy handling - Data interface RS-232, included - Base plate and calibration foils included - Delivered in a hard carrying case - Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value - Selectable measuring units: µm, ml Coating thickness gauge TC: - With integrated sensor Coating thickness gauge TE: - External sensor for difficult-to-access measurements - Auto-Power-Off Coating thickness gauge TG: - External sensor for difficult-to-access measurements - LCD display, backlit, display of all information at a glance - Scan mode allows continuous measurement or single point measuring mode - Mini Statistics Kit: displays the measured result, the average value and the max and the min value - Internal memory up to 99 values 1 2 3 SAUTER Specifications Measuring range: 100 µm/1250 µm Readability: 0.1 µm/1 µm Precision Standard: 3 % of measured value or ±2.5 µm Offset-Accur: 1 % of measured value or ±1 µm Minimal base thickness: 0.3 mm Dimensions (W x D x H) TC, TE/TG: 65 x 28 x 131 mm/65 x 35 x 126 mm Net weight: approx. 81 g Power supply TC, TE/TG: incl. 4 x 1.5 V AAA/2 x 1.5 V AAA batteries Type PK Cat. No. TC 1250-0.1FN. TE 1250-0.1FN. TG 1250-0.1FN. 1 1 1 6.270 968 6.270 969 6.270 970 1 6.270 968 2 6.270 969 3 6.270 970 Shore hardness testers, analogue, HB Compact handheld durometer for plastics with drag indicator. - Typical application: measurement of penetration (Shore) - Material thickness of the sample, min. 4 mm - Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances - Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials and Shore D for plastics, formica, epoxides, plexiglass etc. - Max mode: Holds the maximum value in the display - Point mode: Shows one instant value - Can be attached to the test stands TI-A0 (for Shore A) and TI-D (for Shore D) - Screws to screw on to the TI: M7 fine thread - Delivered in a wooden carrying case 4 SAUTER Specifications Precision: 3 % of measured value Dimensions (W x D x H): 60 x 25 x 115 mm Net weight: approx. 160 g Type Measuring range Readability PK Cat. No. HS HS HBA 100-0. HBD 100-0. 100 HA 100 HD 1,0 HA 1,0 HD 1 1 6.284 083 6.270 975 4