Cope-LLG Catalogue 2018

580 5. Sample preparation Mixing, Homogenisation/Dispersers GENERAL CATALOGUE EDITION 20 E & OE. Homogeniser, handheld, POLYTRON ® PT 1300 D (High End Line) This homogenizer, either handheld or mounted on a swivel type stand, is ideal for quick processing of small sample quantities and volumes. The low weight of the PT 1300 D makes it easy for repeated usages. Storing the desired speed ensures repetitive and reproducible homogenizations. When the unit is switched off, the last stored speed is saved. This drive can be controlled using our KIN software from a PC via USB or RS232. There are many different styles of aggregates available from 3 mm in diameter for volumes down to 0.01 ml to 12 mm for volumes up to 250 ml. If cross contamination from sample to sample is a concern, we offer single use synthetic aggregates in 7 and 12 mm diameters. One of the more recent additions to our line is the PT-DA 20/2 X EC aggregate which was specifically designed for homogenizing tablets. - 30 Volt, 100 Watt low-voltage motor with safety transformer - Digital speed control from 2000 to 30000 rpm - Aggregate tip speeds up to 14 m/s produce the finest particles possible - Speed remains constant even when viscosity changes - Soft start prevents splashing of homogenate from sample vessel - Thermal fuse for overload protection - PC interfaces (RS 232 and USB) - MEMO function of the stored speed - Membrane keyboard for fingertip entry of parameters and easy cleaning - User-friendly design - Aggregate replacement using one-handed quick-release coupling (type E) - Various models of EasyClean dispersing aggregates Stand and dispersing aggregates must be ordered separately. 1 KINEMATICA Specifications Application volume: 0.05 to 250 ml Motor input power: 100 W Dispersing heads: diam. 3, 5, 7 and 12 mm and diam. 20 mm X EC-E116 Speed range: Stepless up to 30000 rpm Interface: RS 232/USB B Dimensions Drive/Base (L x W x H): 210 x 40 x 45 mm/230 x 205 x 95 mm Weight Drive/Base: 620 g/1000 g Power supply: 9 -250 V ±10 %, 50/60 Hz Protection class acc. to DIN: IP 20 Tested to: IEC/EN 61000-6-2/EN 61000-6-3/IEC/EN 61010-2-51 Type PK Cat. No. POLYTRON ® PT 1300 D, with EU plug POLYTRON ® PT 1300 D, with CH plug 1 1 9.571 493 6.286 772 1 Homogeniser, stand, POLYTRON ® PT 2500 E (Ecoline) The PT 2500 E is the ideal solution for cost-conscious laboratories. It is able to perform homogenisations with volumes from 0.05 to 2500 ml. The electronic control system continuously monitors the speed and automatically adjusts it, keeping it constant with changing viscosity. The speed is easily seen on the large digital display. Dispersing heads with a variety of styles and diameters are available to provide optimum particle size reduction when using this drive. There are many different styles of aggregates available from 3 mm up to 25 mm - Aggregate tip speeds up to 32 m/s - Soft start prevents splashing of homogenate from sample vessel - Thermal fuse for overload protection - Speed remains constant even when viscosity changes - Aggregate replacement using one-handed quick-release coupling (type E) - Insulated motor housing keeps motor noise to a safe, approved level - Various models of EasyClean dispersing aggregates - Digital display Stand and dispersing heads must be ordered separately. 2 KINEMATICA Specifications Application volume: 0.05 to 2500 ml Motor input power: 500 W Dispersing heads: diam. 3, 5, 7 and 12 mm and diam. 20 mm and 25 mm Speed range: Stepless 500 to 30.000 rpm Dimensions Drive (L x W x H): 157 x 76 x 236 mm Weight Drive: 1.8 kg Power supply: 230 V ±10 %, 50 Hz Protection class acc. to DIN: IP 20 Tested to: IEC/EN61326-1/IEC/EN 61000-6-2/EN 61000-6-4 IEC/EN 61010-2-51 Type PK Cat. No. POLYTRON ® PT 2500 E, with EU plug POLYTRON ® PT 2500 E, with CH plug 1 1 7.981 185 6.263 341 2