Cope-LLG Catalogue 2018

718 6. Distillation, separation, filtration Filtration/In-Line filter GENERAL CATALOGUE EDITION 20 E & OE. LLG-Inline-filters The 50 mm inline filter with it's ultra pure Polypropylene housing (ultrasonic welded) is designed to contain 47 mm membranes. The filter comes with 6-12 mm hose connectors (tapered) at the inlet and the outlet side. The PTFE-membrane can be used for filtration of aggressive chemicals including acids and non-aqueous solutions. Due to its high filter area of 1735 mm² the filter is suitable for long term gas filtration /venting applications, it could be used for filtration of higher volumes of liquid (up to approximately 500 ml, depending on the particle load of the filtrated suspension) or for filtration of aggressive non aqueous liquids. - hydrophobic PTFE-membrane - Housing polypropylene - autoclavable at 121 °C for 20 minutes at 2 bar, max. 3 cycles - stepped hose connector of 6-10 mm on either sides - high throughput with low pressure drop - max. operating pressure 4.0 bar 1 Diam. Pore size PK Cat. No. mm µm 50 50 0.20 0.45 5 5 9.059 513 9.059 514 1 In-line filters, Midisart 2000 Midisart 2000 in-line filters. For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction (3 bar max. pressure). - Stepped horse-barb of 6-12 mm on either sides - sterile single packed filters, autoclavable 2 Sartorius Type Diam. Pore size PK Cat. No. mm µm sterile sterile non sterile sterile sterile 62 62 62 62 62 0.20 0.20 0.20 0.45 0.45 12 25 100 12 25 9.049 151 9.049 152 9.049 153 9.049 156 9.049 157 2 In-Line-Filter, disposable, Polydisc TF ™ Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46 mm. Connections: For 6 mm to 10 mm diameter bore tubing. Also accept male luer slip. - Hydrophobic PTFE membrane - Pore sizes 0.1 µm, 0.2 µm, 0.45 µm, 1.0 µm - 1µm pore size unit has a PP prefilter - Autoclavable at 131 °C for 20 minutes - Maximum operating pressure 4.0 bar Suitable for chemically aggressive solutions, reagents and organic solvents. Ideal for protective venting, in-line filtration and isolation applications. Non-sterile. 3 GE Healthcare Pore size PK Cat. No. µm 0.10 0.20 0.45 1.00 10 10 10 10 9.951 096 9.951 097 9.951 098 9.951 099 3