Cope-LLG Catalogue 2018

806 7. Heating and cooling technology Temperature regulators/Temperature Control Accessories GENERAL CATALOGUE EDITION 20 E & OE. Thermal fluids Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results. 1 Huber Type Description Capacity Temp. range PK Cat. No. litres °C P20.190.40 P20.190.40 P20.275.50 P20.275.50 M20.195/235.20 M20.195/235.20 M40.165.10/220.10 M40.165.10/220.10 M60.115.05/200.05 M60.115.05/200.05 M90.055.03/170.03 M90.055.03/170.03 Thermal fluid MinOil Thermal fluid MinOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil Thermal fluid SilOil 5 20 5 10 5 10 5 10 5 10 5 10 +20 bis +190 +20 bis +190 +20 bis +275 +20 bis +275 -20 bis +195/235 -20 bis +195/235 -40 bis +165/220 -40 bis +165/220 -60 bis +115/200 -60 bis +115/200 -90 bis +55/170 -90 bis +55/170 1 1 1 1 1 1 1 1 1 1 1 1 6.201 643 6.239 618 6.201 670 6.203 535 6.306 078 6.250 420 6.250 278 6.304 378 6.201 255 6.225 263 7.615 661 6.202 172 Further thermal fluids available on request 1 Thermal fluid DW-Therm DW-Therm is a mixture of isometric triethoxysilanes and has been developed for hydraulically sealed systems. - temperature range from -90 °C to +200 °C (hydraulically sealed systems) - excellent stability at high temperatures - low viscosity at low temperatures - low volatility and pleasant odour - good compatibility with silicone oils - insoluble in water and environmentally friendly - not classified as dangerous goods, no known toxicity 2 Huber Specifications Appearance: transparent, colourless or yellow liquid Silane content: 99% Viscosity: 2.0 - 2.2 mm² /sec at 20 °C Density: 0.88g/cm³ at 15 °C Boiling range 228 - 235 °C Solidification at: -137 °C Flash point: 101 °C Ignition temperature: 265 °C Usage: closed systems Type Description Capacity Temp. range PK Cat. No. Litres °C M90.200.02 Thermal fluid DW-Therm 10 -90 to +200 °C 1 6.201 320 2 Thermal fluid DW-Therm HT DW-Therm HT is a mixture of partially hydrogenated terphenyls. It is for use exclusively in high temperature Unistats. - temperature range from 20 to 340 °C (hydraulically sealed systems) - long lifetime at high temperatures under inert atmosphere: 3-4 years - good thermal properties for heat transfer - high thermal oxidation stability - nontoxic Huber Specifications Appearance: clear, orange coloured liquid Silane content: 99.5% partially hydrogenated naphtalenes Viscosity: 51 mm²/sec at 20 °C Density: 1.043 g/cm³ at 20 °C Initial boiling point: approx. 352 °C Solidification point: -33 °C Flash point: approx. 190 °C Ignition temperature: approx. 385 °C Usage: closed systems Type Description Capacity Temp. range PK Cat. No. Litres °C P20.340.32 P20.340.32 Thermal fluid DW-Therm HT Thermal fluid DW-Therm HT 5 10 +20 ... +340 +20 ... +340 1 1 6.204 286 6.222 503