Cope-LLG Catalogue 2018

811 7. Heating and cooling technology Heating/Water baths GENERAL CATALOGUE EDITION 20 E & OE. Incubation/Inactivation Water Baths Water Baths for incubations and inactivations of cultures Models 1002-1005/1008/1012/1013 Microprocessor controlled temperature regulation. Temperature display and setting digitally via LED display in 0.1 °C increments. Temperature constancy ±0.1 °C, temporal at 50 °C. Temperature range from approx. 5 °C above ambient temperature to 99.9 °C (Models 1002 to 1008), from approx. 10 °C above ambient temperature to 99.9 °C (Models 1012 bis 1013), after installation of a water level regulator 1919 (accessory) from approx. 3 °C above tap water temperature to 99.9 °C. Short heating-up times. Electronic overtemperature cut-out, 4°C above set temperature and electromechanical >130 °C. Electronic monitoring of the temperature regulator. In case of failure the cause of the fault is shown on the display. Soft touch keys with clear symbols. Interior (bath interior and heating element, cover frame, lid and perforated floor) made of stainless steel. Standard equipment includes lid and perforated floor*. Tip-up, insulating lid with inner chamber, no dripping back of condensate into the vessels. Corrosion-resistant outer housing is made of electrolytically galvanized sheet steel, powder-coated. Drain cock at the back. The units are tested according to the German Equipment Safety Law and have the CE mark. Electrical connection: 230 V, 50/60 Hz (other voltages available on request). Model 1005 Especially suitable for warming medical hot packs. *Water bath 1005 is supplied without perforated floor if the rack for hot packs 1923 (accessory) is ordered. Models 1012/1013 The circulation system ensures an optimal temperature uniformity throughout the whole bath. An electric motor with rotary magnet is flanged to the bath floor. Its torque is transmitted to a PTFE coated stirring magnet in the bath. The stirring magnet forces the water into the centre of the bath and then evenly back again. 1 GFL Type Capacity External dimensions (W x D x H) Internal dimensions (W x D x H) Power Weight PK Cat. No. Litres mm mm W kg 1002 1003 1004 1005 1008 1012 1013 7 14 21 40 20 7 14 340 x 395 x 255 500 x 440 x 255 700 x 440 x 255 510 x 490 x 445 500 x 440 x 325 340 x 395 x 325 500 x 440 x 325 245 x 200 x 145 400 x 245 x 145 600 x 245 x 145 410 x 296 x 315 400 x 245 x 205 245 x 200 x 145 400 x 245 x 145 1000 1500 1500 1500 1500 1000 1500 9.0 12.5 16.7 20.7 14.7 10.6 14.6 1 1 1 1 1 1 1 9.905 902 9.905 903 9.905 904 9.905 905 9.905 908 9.905 912 9.905 913 1 Table of racks held by water baths 1002-1013 GFL Bath model 1002 1003/1008 1004 1005 1012 1013 Max. number of rack types held Rack 1920 4 8 12 9 4 8 Rack 1921 4 8 12 9 4 8 Rack 1922 4 8 12 9 4 8 Rack 1923 - - - 1 - - Rack 1942 1 2 3 2 1 2 Stainless steel. 1920/1921/1922. Max height: 185 mm. 2 Type Description PK Cat. No. 1920 1921 1922 With 20 apertures, each 18 mm diameter With 5 apertures, each 31 mm diameter With 20 apertures each 13 mm diameter 1 1 1 9.905 970 9.905 971 9.905 972 2