Cope-LLG Catalogue 2018

862 7. Heating and cooling technology Heating/CO 2 -Incubators GENERAL CATALOGUE EDITION 20 E & OE. CO 2 Incubators ICO The new CO 2 Incubators with the unique ControlCOCKPIT with TwinDISPLAY. Safety at all times: When it comes to safety and user friendliness, the highly modern CO 2 incubator ICO is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO 2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO 2 , O 2 , temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilized for 60 minutes at 180 °C (including all sensors). Standard equipment: - Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays - Digital electronic CO 2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation - Interior made of stainless steel 1.4301 (ASTM 304), deep-drawn, seamlessly welded,with rounded corner, with perforated stainless steel shelves (size 50: 1 , sies 105 - 240: 2) and 1 stainless steel water dish (all sizes) - Large-area multi-functional heating system on four sides with additional door and back heating to avoid condensation - Housing made of textured stainless steel, rear zinc-plated steel - Fully insulated stainless steel door and heated inner glass door - Operation and setting of all parameters via ControlCOCKPIT - High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards - Internal data logger with a storage capacity of at least 10 years - German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT - Digital backwards counter with target time setting, adjustable from 1 minute to 99 days - The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber - Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT - Works calibration certificate (measuring point chamber centre) at +37 °C, 5 % CO 2 for standard units - Works calibration certificate at 37 °C, 5 % CO 2 and 90 % rh (requires option K7), standard equipment for units with active humidity control - Works calibration certificate at 37 °C, 5 % CO 2 , 90 % rh and 10 % O 2 (requires option K7 and option T6); standard equipment for units with O 2 control Accessories on request. 1 Memmert Specifications Working-temperature range 5 °C above ambient up to +50 °C (standard sterilisation programme: 60 minutes at 180 °C (without removing the sensors) Setting temperature range: +18 °C up to +50 °C Setting accuracy temperature: Setting accuracy humidity: 0.5 % rh CO 2 -Concentration: 0 to 20 % O 2 -Concentration: 1 to 20 % Setting accurady CO 2 : 0.1 % Setting accuracy O 2 : 0.1 % Power supply: 230 V, 50/60 Hz 0.1 °C Humidity limitation thanks to a Peltier element: when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh ±2.5 % Setting range active humidity control: 40 to 97 % rh and rh-Off 1 Type Internal volume Internal dimensions (W x D x H) External dimensions (W x D x H) Shelf support ribs/shelves Rating Weight PK Cat. No. litres mm mm W kg ICO50med ICO105med ICO150med ICO240med 56 107 156 241 400 x 330* x 425 560 x 400* x 480 560 x 400* x 700 600 x 500* x 810 559 x 521** x 791*** 719 x 591** x 846*** 719 x 591** x 1066*** 759 x 691** x 1176*** 5/1 6/2 10/2 12/2 1000 1500 2000 2000 55 75 90 110 1 1 1 1 6.283 118 6.283 119 6.283 120 6.283 121 * less 35 mm for fan **depth without door handle, depth of door handle 56 mm ***variable through adjustable feet