Cope-LLG Catalogue 2018

864 7. Heating and cooling technology Heating/Shaking incubators GENERAL CATALOGUE EDITION 20 E & OE. Shaking Incubators 3031, 3032 and 3033 with Orbital Motion Specialising in gentle mixing as well as vigorous shaking, GFL Shaking Incubators are used for applications that require exactly reproducible orbital motions and temperatures of up to +70 °C, e.g. incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies, as well as for bacterial culture. The units carry the CE mark. Incubation time, temperature and shaking frequency regulation are microprocessor-controlled. Fast and exact temperature setting, exact reproducibility of set values. - built-in RS232 interface for data transfer of measurement, control and adjustment tasks via PC. - temperature range: from 8 °C above ambient to +70 °C. Serial cooling coil for operation below ambient temperature. Operation with cooling coil: +20 °C to +70 °C (dependent on cooling media and ambient temperature) - temperature constancy (temporal): ±0.2 °C - soft-touch keys with clear symbols - setting and display of temperature (in 0.1 °C increments), shaking frequency and incubation time: digital - LED. - optimum temperature distribution throughout the cabinet interior with a ventilator - electronic monitoring of the temperature controller. Over-temperature cut-out: electronical/dependent on the set value, to protect the test substances, and electro-mechanically, to protect the unit. Under-temperature cut-out: electronical, max. 9.9 °C below set temperature. - shaking motion: orbital, can be switched on and off. - silent and robust shaking mechanism with gentle start-up. - Incubation time: 1 minute to 999:59 hours - the microprocessor-controlled timer continuously displays the remaining period of the incubation process and triggers an audible alarm at the finish - Maximum load 3031/3032/3033: 12kg/12kg/20kg - Supply requirements: 230V 50/60 Hz, 0.8kW (other voltages are available on request) Type 3031 : Lift-up, transparent acrylic cover. Volume/capacity: approx. 46 litres/1 shaking tray. Outer casing made of heavy-duty ABS and powder-coated, electrolytically galvanized sheet steel. The aluminium shaking platform includes four plastic pins to accept a shaking tray or a universal mount (accessories). - shaking frequency: 20 to 250 rpm max. Type 3032 (one-door design)/ Type 3033 (two-door design): Acrylic window panels. Volume: approx. 45 L/approx. 150 L, capacity: 2 shaking trays (for vessel heights > 150 mm/180 mm: 1 shaking tray). Outer casing in powder-coated, electrolytically galvanized sheet steel. Interior cabinet, the insides of the doors and the shaking platform are stainless steel. The frame, permitting the use of two shaking trays, is included. A fluorescent lamp for interior illumination is separated from the interior cabinet by a diffusing screen. - Shaking speed type 2032: 20 to max. 250 rpm - Shaking speed type 3033: 20 to max. 250 rpm, if only bottom tray is fitted, max. 200 rpm, if both trays are fitted 1 2 3 GFL Type External dimensions (W x D x H) Internal dimensions (W x D x H) Amplitude Max. Weight PK Cat. No. mm mm mm kg kg 3031 3032 3033 525 x 665 x 570 710 x 650 x 710 930 x 890 x 820 450 x 450 x 280 450 x 300 x 320 674 x 540 x 430 30 25 25 12 12 20 38.50 70.00 135.00 1 1 1 9.837 926 9.837 927 9.837 929 1 9.837 926 2 9.837 927 3 9.837 929 Trays for Shaking Incubators Tray 3966 for Shaking Incubator 3031 and GFL Shakers 3011 to 3018 Stainless steel, 450 mm x 450 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories. Tray 3970 for Shaking Incubator 3032 Stainless steel, 450 mm x 300 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories. Tray 3980 for Shaking Incubator 3033 and GFL Shakers 3019 to 3020 Anodised aliminium, 670 mm x 537mm. With holes to accept clamps for Erlenmeyer flasks and other acessories. 4 GFL Type For Type PK Cat. No. 3966 Tray 3970 Tray 3980 3011 - 1018 / 3031 3032 3033 / 3019 / 3020 1 1 1 9.837 936 9.837 990 9.837 980 4