Cope-LLG Catalogue 2018

889 8. Liquid Handling Volumetric apparatus/Measuring cylinders GENERAL CATALOGUE EDITION 20 E & OE. Measuring cylinders, PP, tall form, class B, moulded graduations - Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion. - They offer high transperency, chemical resistance and remarkable heat tolerance. - They meet the highest quality standards according to DIN 12681 and ISO 6706. - Individually calibrated through automatic calibration process carried out by robots. - Permanent quality control through all steps eliminate possible deviations from nominal values. - Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards. - Graduations are embossed and specially designed for plastic and resistant to 60 °C. - For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60 °C and should not be kept under direct sunlight or overheated conditions. 1 ISOLAB Capacity Tolerance Grad. Height PK Cat. No. ml ± ml ml mm 10 25 50 100 250 500 1000 0.2 0.5 1.0 1.0 2.0 5.0 10.0 0.2 0.5 1.0 1.0 2.0 5.0 10.0 135 160 195 240 320 380 465 1 1 1 1 1 1 1 6.243 541 6.243 542 6.243 543 6.243 544 6.243 545 6.243 546 6.243 547 1 Graduated cylinders, PP, class B, embossed scale Tall form, PP, with spout, high clarity. DIN 12681 and ISO 6706. Calibrated to contain (TC, In). Exposure to temperatures up to 80 °C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60 °C is recommended to preserve marks and inscriptions. 2 Capacity Grad. Tolerance Height PK Cat. No. ml ml ± ml mm 10 25 50 100 250 500 1000 2000 0.2 0.5 1.0 1.0 2.0 5.0 10.0 20.0 0.2 0.5 1.0 1.0 2.0 5.0 10.0 20.0 145 170 200 250 315 360 440 535 1 1 1 1 1 1 1 1 9.274 760 9.274 761 9.274 762 9.274 763 9.274 764 9.274 765 9.274 766 9.274 767 2 9.274 762 Measuring cylinders, PP, tall form, class B, blue moulded graduations Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80 ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60 ºC. Food-safe (suitable for contact with foodstuff in accordance with Regulation (EC) No. 10/2011). 3 VITLAB Capacity Grad. Tolerance Diam. Height PK Cat. No. ml ml ± ml mm mm 10 25 50 100 250 500 1000 2000 0.20 0.50 1.00 1.00 2.00 5.00 10.00 20.00 0.2 0.5 1.0 1.0 2.0 5.0 10.0 20.0 15 22 27 33 44 58 69 97 145 170 200 250 315 360 440 482 1 1 1 1 1 1 1 1 9.274 408 9.274 409 9.274 410 9.274 411 9.274 412 9.274 413 9.274 414 9.274 415 3 9.274 411 BRAND